Microstructure of rapidly solidified Cu-25 wt.% Cr alloys

doi:10.1016/j.msea.2005.03.095

IMR OpenIR

	Microstructure of rapidly solidified Cu-25 wt.% Cr alloys
	Zhou, ZM ; Wang, YP ; Gao, J ; Kolbe, M
通讯作者	Gao, J()
	2005-05-25
发表期刊	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN	0921-5093
卷号	398 期号:1-2 页码:318-322
摘要	Rapid solidification of Cu-25 wt.% Cr alloys was carried out by melt spinning at three wheel speeds 4.12 and 36 m/s. The the ribbons was investigated by scanning electron microscopy (SEM). It was found that the ribbons generally have a microstructure consisting of a fine dispersion of a Cr-rich phase in a Cu-rich matrix, and that the morphology and size of the Cr-rich phase vary with the wheel speed. For lower wheel speeds, the Cr-rich phase shows dual morphologies, dendrites and spheroids. The Cr-rich dendrites are all distributed around the Cr-rich spheroids, and have a larger amount on the free surface than on the wheel surface. The Cr-rich spheroids show a wide distribution of size, and have a larger mean size on the free surface than on the wheel surface. In the ribbons of the lowest wheel speed, small Cr-rich spheroids tend to gather around those big ones forming spheroid clusters. For the highest wheel speed, the Cr-rich phase shows one morphology, spheroids, and a reduced size. The results were discussed with respect to the formation of the Cr-rich spheroids during rapid solidification. (c) 2005 Elsevier B.V. All rights reserved.
关键词	Cu-Cr alloys liquid phase separation rapid solidification microstructure
DOI	10.1016/j.msea.2005.03.095
收录类别	SCI
语种	英语
WOS研究方向	Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000229998100040
出版者	ELSEVIER SCIENCE SA
引用统计	被引频次：51[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/84463
专题	中国科学院金属研究所
通讯作者	Gao, J
作者单位	1.Northeastern Univ, Key Lab Electromagnet Proc Mat, Shenyang 110004, Peoples R China 2.Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China 3.German Aerosp Ctr, Inst Space Simulat, D-51170 Cologne, Germany
推荐引用方式 GB/T 7714	Zhou, ZM,Wang, YP,Gao, J,et al. Microstructure of rapidly solidified Cu-25 wt.% Cr alloys[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2005,398(1-2):318-322.
APA	Zhou, ZM,Wang, YP,Gao, J,&Kolbe, M.(2005).Microstructure of rapidly solidified Cu-25 wt.% Cr alloys.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,398(1-2),318-322.
MLA	Zhou, ZM,et al."Microstructure of rapidly solidified Cu-25 wt.% Cr alloys".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 398.1-2(2005):318-322.