Deformation analysis of hot stamping tools by thermal-fluid-mechanical coupled approach based on MpCCI

IMR OpenIR

	Deformation analysis of hot stamping tools by thermal-fluid-mechanical coupled approach based on MpCCI
	T.; Zhang Lin, S. H.; Song, H. W.; Cheng, M.; Sun, J. Q.
	2014
发表期刊	Materials Research Innovations
ISSN	1432-8917
卷号	18 页码:1068-1073
摘要	Hot stamping tools with cooling systems are key facilities for hot stamping processes in the automotive industry. In hot stamping, the tools are heated by workpieces and rapidly cooled by cooling water. The thermal deformation of the tools has a significant influence on the properties of the hot stamped parts and the useful life of the tools. In this paper, a multi-field simulation method is proposed for analysis of deformation in the tools. Based on a mesh based parallel code coupling interface, a thermal-fluid-mechanical coupled model is established to analyse the cooling effect and the deformation of the tools. The experimental set-up was built to verify the multi-field coupling model. It is shown that the cooling rate of the hot stamped part was 217 degrees C s(-1), higher than the critical cooling rate of 30 degrees C s(-1). The temperature history of the hot formed part was in good agreement with the experimental result. The cooling ducts were deformed because of the thermal expansion of the hot tools. This led to stress concentration at the rectangular corner of the ducts. The speed of cooling water flow increased by 112% through the bottom ducts, while at the corners of the ducts, the speed was very low and a 'hot spot' appeared.
部门归属	[lin, t. ; zhang, s. -h. ; song, h. -w. ; cheng, m.] chinese acad sci, inst met res, shenyang 110016, peoples r china. [sun, j. -q.] shenyang ligong univ, coll vehicle & traff, shenyang 110168, peoples r china. [cheng, m.] nanchang hangkong univ, sch mfg engn aerosp vehicle, nanchang 330063, peoples r china. ; zhang, sh (reprint author), chinese acad sci, inst met res, 72 wenhua rd, shenyang 110016, peoples r china. ; shzhang@imr.ac.cn
关键词	Hot Stamping Tools Deformation Coupled Thermal-fluid-mechanical Simulation Simulation Mpcci
URL	查看原文
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/73858
专题	中国科学院金属研究所
推荐引用方式 GB/T 7714	T.,Zhang Lin, S. H.,Song, H. W.,et al. Deformation analysis of hot stamping tools by thermal-fluid-mechanical coupled approach based on MpCCI[J]. Materials Research Innovations,2014,18:1068-1073.
APA	T.,Zhang Lin, S. H.,Song, H. W.,Cheng, M.,&Sun, J. Q..(2014).Deformation analysis of hot stamping tools by thermal-fluid-mechanical coupled approach based on MpCCI.Materials Research Innovations,18,1068-1073.
MLA	T.,et al."Deformation analysis of hot stamping tools by thermal-fluid-mechanical coupled approach based on MpCCI".Materials Research Innovations 18(2014):1068-1073.