IMR OpenIR
Reciprocating Wear Performance and Interfacial Microstructure of a TiC-Ni2AlTi Cermet
H. Zhang; X. H. Wang; M. Y. Liu; X. M. Fang
2014
发表期刊Tribology Letters
ISSN1023-8883
卷号55期号:2页码:211-218
摘要Wear performance of a near equi-volume TiC-Ni2AlTi cermet with minor NiAl was evaluated by reciprocal sliding against Si3N4 balls. Both coefficient of friction (COF) and specific wear rate (SWR) decrease with the applied load in the range from 5 to 20 N, reaching minimums of 0.34 and 2.2 x 10(-6) mm(3)/Nm, respectively, at 20 N. To understand the novel wear resistance, interfacial microstructure was investigated. As indicated by high resolution transmission electron microscopy observations, the interfaces are either coherent (TiC/NiAl and Ni2AlTi/NiAl) or semi-coherent (TiC/Ni2AlTi). Depending on the grain size of Ni2AlTi, two types of TiC/Ni2AlTi interface were observed. For the micrometer or sub-micrometer sized Ni2AlTi grains, the orientation relationship (OR) is (111) TiC ayen (220) Ni2AlTi, [10] TiC ayen [10] Ni2AlTi, while for the Ni2AlTi grains in tens of nanometers, the OR is (020) TiC ayen (002) Ni2AlTi, [101] TiC ayen [010] Ni2AlTi. The strongly bonded coherent and semi-coherent interfaces impede the failure of the heterophase boundaries, which accounts for the excellent wear resistance of the newly prepared cermet.
部门归属[zhang, hui ; wang, xiaohui ; liu, mingyue ; fang, xuanming] chinese acad sci, shenyang natl lab mat sci, inst met res, shenyang 110016, peoples r china. [zhang, hui ; fang, xuanming] univ chinese acad sci, beijing 100049, peoples r china. ; wang, xh (reprint author), chinese acad sci, shenyang natl lab mat sci, inst met res, 72 wenhua rd, shenyang 110016, peoples r china. ; wang@imr.ac.cn
关键词Carbide Wear Resistance Interface Ni2alti Tem Cemented Carbides Melt-infiltration Abrasive Wear Sliding Wear Composites Toughness Strength Behavior Alloys
URL查看原文
语种英语
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/73490
专题中国科学院金属研究所
推荐引用方式
GB/T 7714
H. Zhang,X. H. Wang,M. Y. Liu,et al. Reciprocating Wear Performance and Interfacial Microstructure of a TiC-Ni2AlTi Cermet[J]. Tribology Letters,2014,55(2):211-218.
APA H. Zhang,X. H. Wang,M. Y. Liu,&X. M. Fang.(2014).Reciprocating Wear Performance and Interfacial Microstructure of a TiC-Ni2AlTi Cermet.Tribology Letters,55(2),211-218.
MLA H. Zhang,et al."Reciprocating Wear Performance and Interfacial Microstructure of a TiC-Ni2AlTi Cermet".Tribology Letters 55.2(2014):211-218.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[H. Zhang]的文章
[X. H. Wang]的文章
[M. Y. Liu]的文章
百度学术
百度学术中相似的文章
[H. Zhang]的文章
[X. H. Wang]的文章
[M. Y. Liu]的文章
必应学术
必应学术中相似的文章
[H. Zhang]的文章
[X. H. Wang]的文章
[M. Y. Liu]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。