Grinding quality evaluation and removal mechanism of resin-coated SiC and 2.5D-C-SiCs surface strategies

doi:10.1016/j.triboint.2024.110181

IMR OpenIR

	Grinding quality evaluation and removal mechanism of resin-coated SiC and 2.5D-C-SiCs surface strategies
	Qu, Shuoshuo 1,2,3,4; Li, Luyao 5; Yang, Yuying 5; Pang, Shengyang 6; Chu, Dongkai 1,3,4; Wei, Chengxiang 1,3,4; Yin, Zhirong 7; Yao, Peng 1,3,4
通讯作者	Qu, Shuoshuo(qushuoshuo@163.com) ; Yang, Yuying(yyyingneu@163.com) ; Yao, Peng(yaopeng@sdu.edu.cn)
	2024-12-01
发表期刊	TRIBOLOGY INTERNATIONAL
ISSN	0301-679X
卷号	200 页码:13
摘要	The paper proposes a strategy to enhance the processing quality of SiC and 2.5D-C-SiCs by coating epoxy resins on the material surface and edges, and then using resin-bonded diamond grinding tools for grinding. Epoxy resin acts as a protective layer that can absorb impacts during grinding, reduce damage, and thus improve the processing quality of the surface and edges. The experimental results show that resin coatings can effectively improve the surface quality of SiC and 2.5D-C-SiCs. By adjusting the RT and RE, processing parameters can be further optimized to achieve the best surface quality. This study provides new ideas and methods for enhancing the surface quality of SiC and 2.5D-C-SiCs materials, with important application prospects and practical significance.
关键词	SiC 2.5D-C-SiCs Surface quality Grinding
资助者	Key Laboratory of High-effciency and Clean Mechanical Manufacture at Shandong University ; Ministry of Education ; National Natural Science Foundation of China ; Shandong Provincial Natural Science Foundation ; Guangdong Basic and Applied Basic Research Foundation ; Basic Research Projects for the Pilot Project of Integrating Science, Education, and Industries of Qilu University of Technology (Shandong Academy of Sciences)
DOI	10.1016/j.triboint.2024.110181
收录类别	SCI
语种	英语
资助项目	Key Laboratory of High-effciency and Clean Mechanical Manufacture at Shandong University ; Ministry of Education ; National Natural Science Foundation of China[52305484] ; National Natural Science Foundation of China[52305475] ; National Natural Science Foundation of China[52375420] ; National Natural Science Foundation of China[52075302] ; Shandong Provincial Natural Science Foundation[ZR2022QE053] ; Shandong Provincial Natural Science Foundation[ZR2022QE159] ; Guangdong Basic and Applied Basic Research Foundation[2022A1515111124] ; Basic Research Projects for the Pilot Project of Integrating Science, Education, and Industries of Qilu University of Technology (Shandong Academy of Sciences)[2023PX014]
WOS研究方向	Engineering
WOS类目	Engineering, Mechanical
WOS记录号	WOS:001304005000001
出版者	ELSEVIER SCI LTD
引用统计	被引频次：6[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/189421
专题	中国科学院金属研究所
通讯作者	Qu, Shuoshuo; Yang, Yuying; Yao, Peng
作者单位	1.Shandong Univ, Key Lab High Effciency & Clean Mech Manufacture, Minist Educ, Jinan, Peoples R China 2.Shandong Univ, Shenzhen Res Inst, Shenzhen, Peoples R China 3.Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Jinan, Peoples R China 4.Shandong Univ, Ctr Adv Jet Engn Technol CaJET, Sch Mech Engn, Jinan, Peoples R China 5.Qilu Univ Technol, Shandong Acad Sci, Sch Mech Engn, Jinan, Peoples R China 6.Chinese Acad Sci, Inst Met Res, Wenhua Rd 72, Shenyang 110016, Peoples R China 7.China Univ Petr East China, Coll Mech & Elect Engn, Qingdao 266580, Peoples R China
推荐引用方式 GB/T 7714	Qu, Shuoshuo,Li, Luyao,Yang, Yuying,et al. Grinding quality evaluation and removal mechanism of resin-coated SiC and 2.5D-C-SiCs surface strategies[J]. TRIBOLOGY INTERNATIONAL,2024,200:13.
APA	Qu, Shuoshuo.,Li, Luyao.,Yang, Yuying.,Pang, Shengyang.,Chu, Dongkai.,...&Yao, Peng.(2024).Grinding quality evaluation and removal mechanism of resin-coated SiC and 2.5D-C-SiCs surface strategies.TRIBOLOGY INTERNATIONAL,200,13.
MLA	Qu, Shuoshuo,et al."Grinding quality evaluation and removal mechanism of resin-coated SiC and 2.5D-C-SiCs surface strategies".TRIBOLOGY INTERNATIONAL 200(2024):13.