FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N

doi:10.2298/JMMB201026025Q

IMR OpenIR

	FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N
	Qiao, Y-X 1; Sheng, S-L 1; Zhang, L-M 2; Chen, J.1; Yang, L-L 1; Zhou, H-L 1; Wang, Y-X 1; Li, H-B 3; Zheng, Z-B 4
通讯作者	Qiao, Y-X(yxqiao@just.edu.cn)
	2021
发表期刊	JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY
ISSN	1450-5339
卷号	57 期号:2 页码:285-293
摘要	The friction and wear behaviors of a Fe-19Cr-15Mn-0.66N high nitrogen austenitic stainless steel (HNSS) were investigated. Tribological investigations were carried out under different applied loads of 5 N, 10 N, 15 N, and 20 N. Scanning electron microscope (SEM) and laser scanning confocal microscope (LSCM) were used to understand the wear mechanisms under different loads and the reasons for the improved wear resistance. The lower friction coefficient and improved wear resistance were observed with the increase in applied loads. Under a higher load, the friction enhanced the work hardening ability of HNSS, which in turn improved its surface hardness and thus the increased wear resistance of HNSS.
关键词	High nitrogen austenite stainless steel Wear Work hardening Friction coefficient
资助者	National Natural Science Foundation of China ; Science and Technology Planning Project of Guangzhou
DOI	10.2298/JMMB201026025Q
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51905110] ; National Natural Science Foundation of China[51401092] ; Science and Technology Planning Project of Guangzhou[201906040007]
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000672591100015
出版者	TECHNICAL FACULTY, BOR-SERBIA
引用统计	被引频次：36[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/160057
专题	中国科学院金属研究所
通讯作者	Qiao, Y-X
作者单位	1.Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang, Jiangsu, Peoples R China 2.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang, Peoples R China 3.Northeastern Univ, Sch Met, Shenyang, Peoples R China 4.Guangdong Inst Mat & Proc, Guangdong Key Lab Met Toughening Technol & Applic, Guangzhou, Peoples R China
推荐引用方式 GB/T 7714	Qiao, Y-X,Sheng, S-L,Zhang, L-M,et al. FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N[J]. JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY,2021,57(2):285-293.
APA	Qiao, Y-X.,Sheng, S-L.,Zhang, L-M.,Chen, J..,Yang, L-L.,...&Zheng, Z-B.(2021).FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N.JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY,57(2),285-293.
MLA	Qiao, Y-X,et al."FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N".JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY 57.2(2021):285-293.