Enhanced Mechanical Properties of Al-36Si Composite via Friction Stir Processing and Subsequent Heat Treatment

doi:10.2320/matertrans.M2018090

IMR OpenIR

	Enhanced Mechanical Properties of Al-36Si Composite via Friction Stir Processing and Subsequent Heat Treatment
	Wang, Chen 1,2; Wang, Beibei 2; Wang, Quanzhao 2; Chen, Liqing 1; Xue, Peng 2; Xiao, Bolv 2; Ma, Zongyi 2
通讯作者	Xue, Peng(pxue@imr.ac.cn)
	2018
发表期刊	MATERIALS TRANSACTIONS
ISSN	1345-9678
卷号	59 期号:9 页码:1513-1519
摘要	Friction stir processing (FSP) was applied to modify the microstructures of Al-36Si composite. FSP resulted in a significant breakup of coarse primary Si particles in the processed zone (PZ), and the size and aspect ratio of the Si particles decreased with increasing the number of FSP passes. The refinement and homogenization of Si particles during FSP can lead to an improvement in both strength and ductility, though FSP caused softening behavior in the PZ due to thermal cycle during the processing. Post-FSP aging treatment partially recovered the microhardness in the PZ of FSP samples, resulting in the enhanced strength and ductility. Furthermore, post-FSP T6 treatment resulted in a considerable enhancement in the microhardness in the PZ which could reach up to a similar level of the base material (BM). Therefore, the tensile strength was significantly improved to 381 MPa, which was much higher than that of the BM (187 MPa). This study provides an effective method of improving the mechanical properties of the Al-36Si composite.
关键词	Al-Si composite friction stir processing heat treatment microstructure mechanical property
资助者	National Key R&D Program of China ; National Natural Science Foundation of China
DOI	10.2320/matertrans.M2018090
收录类别	SCI
语种	英语
资助项目	National Key R&D Program of China[2017YFB0703104] ; National Natural Science Foundation of China[51331008]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000458695100019
出版者	JAPAN INST METALS
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/132007
专题	中国科学院金属研究所
通讯作者	Xue, Peng
作者单位	1.Northeastern Univ, State Key Lab Rolling & Automat, 3-11 Wenhua Rd, Shenyang 110819, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China
推荐引用方式 GB/T 7714	Wang, Chen,Wang, Beibei,Wang, Quanzhao,et al. Enhanced Mechanical Properties of Al-36Si Composite via Friction Stir Processing and Subsequent Heat Treatment[J]. MATERIALS TRANSACTIONS,2018,59(9):1513-1519.
APA	Wang, Chen.,Wang, Beibei.,Wang, Quanzhao.,Chen, Liqing.,Xue, Peng.,...&Ma, Zongyi.(2018).Enhanced Mechanical Properties of Al-36Si Composite via Friction Stir Processing and Subsequent Heat Treatment.MATERIALS TRANSACTIONS,59(9),1513-1519.
MLA	Wang, Chen,et al."Enhanced Mechanical Properties of Al-36Si Composite via Friction Stir Processing and Subsequent Heat Treatment".MATERIALS TRANSACTIONS 59.9(2018):1513-1519.